SunBlock Tire Prep

The Perfect Pre-Treatment for SunBlock For Tires

For optimum performance and proper adhesion of SunBlock For Tires, tires MUST be clean and free of any dirt, grease, or other residue, including surface films left by many popular tire dressings. To ensure your tires are clean and free from road grime and residue, always pre-treat your tires with SunBlock Tire Prep… the ultimate surface cleaner/degreaser!

So go to the proven, reliable source for maximum blackwall tire protection. Increase the performance life of your tires…and decrease your tire maintenance costs… with SunBlock For Tires.

Buy now

  • Product Specs
  • Application Instructions
  • Material Safety Data Sheet

Available sizes:

  • 8 ounce (240 ml) spray pump bottle
  • Deluxe Tire Protection Kit - Contains 6 oz. (180 ml) bottle of SunBlock For Tires, 6 oz. (180 ml) bottle of SunBlock Tire Prep, application tray, and reuseable custom applicator; for the treatment of up to four standard or six trailer-sized tires.

For large fleet orders or wholesale pricing please contact sales@sunblockfortires.com

To Clean Tire with SunBlock Tire Prep:

  1. If tire is visibly dirty wash with soap and water. Allow tire to dry (a hair dryer will speed up the drying process) before spraying with SunBlock Tire Prep.
  2. Treating one tire at a time, spray SunBlock Tire Prep on dry tire, wetting all areas to be treated.
  3. Wait 30 to 60 seconds, then brush lightly with a nylon or brass bristle brush.
  4. Rinse thoroughly with water. Let dry completely before applying SunBLock For Tires (a hair dryer will speed up the drying process).
  5. If SunBlock Tire Prep dries on the tire prior to rinsing, apply again and follow above instructions.

Material Safety Data Sheet

SunBlock, Inc. P.O. Box 887 11507 S.E. Hwy. 212 Clackamas, OR 97015 Phone: 503-546-5915 Emergency Phone: 1-800-547-7785 Fax: 503-546-5915

This M.S.D.S. complies with 29 CFR 1910.1200 (The Hazard Communication Standard)

SECTION I - PRODUCT IDENTIFICATION AND USE

PRODUCT NAME: Sunblock Tire Prep

CHEMICAL FAMILY: Mixture, Manufactured by Griffen Bros. For Fuller Bros. Inc.

PRODUCT USE: Prepare tire surface for Sunblock paint application

SECTION II - HAZARDOUS INGREDIENTS / IDENTITY INFORMATION

CAS No. 0 - alkanolamide, 5-10% range, PEL: none, TLV: none

CAS No. 9036195 - Polyethylene glycol octylphenyl ether. , 1-5% range, PEL: none, TLV: none

CAS No. 6497219 - alkyl imino acid, 5-10% range, PEL: none, TLV: none

CAS No. 111762 - 2-butoxyethanol, 1-3% range, PEL: 25ppm, TLV: 25ppm

SECTION III - PHYSICAL / CHEMICAL CHARACTERISTICS

PHYSICAL STATE: Liquid

APPEARANCE AND ODOR: Colorless, slightly chemical

BOILING POINT: 215f

FREEZING STABILITY: avoid freezing

VAPOR PRESSURE: n/a

VAPOR DENSITY: n/a

SPECIFIC GRAVITY: 1.08

EVAPORATION RATE: >1

SOLUBILITY: 100% V.O.C.

CONTENT: 5%

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

FLASHPOINT: 215f O.C.

FLAMMABLE LIMITS:

UEL: n/a

LEL: n/a

FIRE FIGHTING PROCEDURES: n/a

UNUSUAL FIRE AND EXPLOSION HAZARDS: n/a

SECTION V - REACTIVITY DATA

STABILITY:

CONDITIONS TO AVOID:

INCOMPATIBILITY:

HAZARDOUS POLYMERIZATION:

SECTION VI - HEALTH HAZARD AND FIRST AID DATA

EFFECTS OF ACUTE EXPOSURE TO PRODUCT:

ROUTE OF ENTRY:

SKIN: Redness, possible dermatitis - FIRST AID PROCEDURES: Rinse with water

INGESTION: Burning sensation, Cramps - FIRST AID PROCEDURES: Give water. Do not induce vomiting

EYES: Irritation and possible corneal injury - FIRST AID PROCEDURES: Rinse with water for 15 minutes

MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE: Dermatitis

SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE

PERSONAL PROTECTIVE EQUIPMENT:

GLOVES: Yes

RESPIRATOR: No

EYES: Safety Glasses

PRECAUTIONS IN HANDLING AND STORAGE: Avoid excessive heat and avoid freezing

SPILL PROCEDURES: Mop and Rinse with water

WASTE DISPOSAL: Dispose according to Local, State and Federal regulations

HANDLING, STORAGE AND SHIPPING PROCEDURES AND EQUIPMENT:

OTHER PRECAUTIONS:

PREPARED BY: Fuller Brothers, Inc. R&D Dept. Phone: 503-657-9366 Date: 01-01-2011