SunBlock for Tires

The Ultimate UV and Ozone Protection for Tires!

SunBlock For Tires has been specially formulated to block harmful sun and ozone damage to your tires. Right now, UV rays are penetrating your tires, attacking the rubber ingredients that provide flexibility and resilience. SunBlock For Tires will prevent UV penetration and ozone damage, even after years of long-term exposure.

SunBlock For Tires will not peel, crack or weather away. It's the long-term, reliable tire finish, with protection that lasts up to five years! Approved by the U.S. Air Force after extended testing in both the United States and Southeast Asia, SunBlock for Tires was the only product that left tires looking like new after extended periods in hot, UV-intense desert applications.

So go to the proven, reliable source for maximum blackwall tire protection. Increase the performance life of your tires…and decrease your tire maintenance costs… with SunBlock For Tires.

Buy now

  • Product Specs
  • Application Instructions
  • Material Safety Data Sheet

Available sizes:

  • 32 ounce can (1 quart; 940 ml)
  • Tire Protection Kit - Contains 6 oz. (180 ml) bottle of SunBlock For Tires and reuseable custom applicator; for the treatment of up to four standard or six trailer-sized tires.
  • Deluxe Tire Protection Kit - Contains 6 oz. (180 ml) bottle of SunBlock For Tires, 6 oz. (180 ml) bottle of SunBlock Tire Prep, application tray, and reuseable custom applicator; for the treatment of up to four standard or six trailer-sized tires.

For large fleet orders or wholesale pricing please contact sales@sunblockfortires.com

To Apply SunBlock For Tires:

IMPORTANT: Clean surface to be treated with SunBlock Tire Prep/Cleaner before applying SunBlock for Tires UV Protection.

  1. Stir well before using.
  2. Apply one coat to the surface to be treated using a medium quality paintbrush or sponge. With a wet rag, immediately clean up any SunBlock for Tires that may have gotten on the wheel.
  3. Allow to dry completely before moving the vehicle. Drying time varies from one to two hours depending on temperature and humidity. Using a hair dryer will speed up the drying process.
  4. One treatment lasts up to five years. For best results, re-apply every 24 months.
  5. Use warm water to clean the paintbrush or sponge and a wet rag to wipe away any product that may have gotten on other surfaces.

Material Safety Data Sheet

SunBlock Inc. P.O. Box 887 11507 S.E. Hwy. 212 Clackamas, OR 97015 Phone: 503-546-5915 Emergency Phone: 503-546-1040 Fax: 503-657-0528

This M.S.D.S. complies with 29 CFR 1910.1200 (The Hazard Communication Standard)

SECTION I - PRODUCT IDENTIFICATION AND USE

PRODUCT NAME: Sunblock for Tires / External Tire Coating (Black)

CHEMICAL FAMILY: Ultra Violet / Ozone Protective Coating

PRODUCT USE: Applied to outer surface of tires / To prevent weathering of tire surface.

SECTION II - HAZARDOUS INGREDIENTS / IDENTITY INFORMATION

PRODUCT: VM&P Naptha 29CFR1910.1200 % 2.12 by volume TLV: 65ppm

SECTION III - PHYSICAL / CHEMICAL CHARACTERISTICS

PHYSICAL STATE: Viscous Liquid

APPEARANCE AND ODOR: Black; Slight ammonia odor.

BOILING POINT: 218 deg. F.

FREEZING STABILITY: Protect from freezing

VAPOR PRESSURE: (mm Hg) Same as water

VAPOR DENSITY: (Air = 1) Same as water

SPECIFIC GRAVITY: 1.10 EVAPORATION RATE: Same as water

SOLUBILITY: Readily Soluble V.O.C.

CONTENT: 90 grams/liter (Calculated) 82 grams/liter (ASTM D2369-90)

SECTION IV - FIRE AND EXPLOSION HAZARD DATA

FLASHPOINT: 264 deg. F. (PMCC)

FLAMMABLE LIMITS: Unknown, not a flammable material

UEL: Unknown

LEL: Unknown

FIRE FIGHTING PROCEDURES: Wet down unopened drums with water if exposed to unusual heat. Fire fighting personnel should use self contained breathing apparatus.

UNUSUAL FIRE AND EXPLOSION HAZARDS: None believed to exist.

SECTION V - REACTIVITY DATA

STABILITY: Stable

CONDITIONS TO AVOID: Will permanently stain clothing

INCOMPATIBILITY: None known

HAZARDOUS POLYMERIZATION: Will not occur

SECTION VI - HEALTH HAZARD AND FIRST AID DATA

EFFECTS OF ACUTE EXPOSURE TO PRODUCT: None known

ROUTE OF ENTRY: Skin; Ingestion; Eyes

SKIN: Prolonged repeated exposure may cause irritation or rash - FIRST AID PROCEDURES: Wash thoroughly with soap and water

INGESTION - FIRST AID PROCEDURES: Do not induce vomiting, see physician

EYES: Slight irritation may occur - FIRST AID PROCEDURES: Flush liberally with water, if irritation continues, see physician

MEDICAL CONDITIONS GENERALLY AGGRAVATED BY EXPOSURE:

SECTION VII - PRECAUTIONS FOR SAFE HANDLING AND USE

PERSONAL PROTECTIVE EQUIPMENT: Protective outer garments

GLOVES: Recommended but optional

RESPIRATOR: None required

EYES: Safety glasses

PRECAUTIONS IN HANDLING AND STORAGE: Do not store where exposed to temperature extremes or in direct sunlight or freezing temperatures.

SPILL PROCEDURES: Small spill: Mop up; Large spill: Clean with absorbent material

WASTE DISPOSAL: Store in approved container and discharge only to authorized disposal service in compliance with federal, state and local regulations.

HANDLING, STORAGE AND SHIPPING PROCEDURES AND EQUIPMENT:

OTHER PRECAUTIONS: For industrial use; keep away from children.

PREPARED BY: Fuller Brothers, Inc. R&D Dept. Phone: 503-657-9366 Date: 01-01-2010